I started my 93 cavilier it ran for a moment then died. I checked the spark and there is none. The fuel pump works what could have happened. This has never happened before.
have the same problem?
Wednesday, February 23rd, 2011 AT 2:58 PM
Any applicable mil codes? My first thought is the crankshaft position sensor? If you hear the fuel pump, that may be just the initial prime, you don't need an rpm signal for initial prime, but, after the initial prime, if no rpm signal, the vehicle won't start and run.
There is a pink wire with black tracer at the ignition module, should go hot/voltage with the key on, use a voltage tester, is it hot. If not check the ecm fuse.