1992 Toyota Pickup number 2 cylinder not firing

1992 TOYOTA PICKUP
358,000 MILES • 2.4L • 4 CYL • 2WD • MANUAL
Avatar
PHILLIPWEBB159
  • MEMBER
  • 2 POSTS
when i start the truck in the morning all cylinders are firing but when the motor heats up the #2 cylinder is not firing I have changed all spark plugs and cables for spark plugs rotor and cap also the coil this did not help i pull the # 2 spark plug wire off and its not firing Im thinking a valve ajustment or a sticking valve can you recomend and thang before the money hungry mechanics eat my money $
Nov 26, 2015 at 2:14 PM
Advertisement
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
look for vacuum leaks in the area of the cylinder. it could be a dirty injector since you have replaced all the ignition components

Roy
Nov 26, 2015 at 2:31 PM
Avatar
PHILLIPWEBB159
  • MEMBER
  • 2 POSTS
No vacuum leak found injectors were cleaned could be a valve ajustment?
Nov 26, 2015 at 3:20 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
no, it would do it all the time if it was an adjustment.

how were the injetors cleaned??

Roy
Nov 26, 2015 at 3:22 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.