92 Lincoln Town Car

Tiny
92 LINCOLN 4.6
  • MEMBER
  • 1992 LINCOLN TOWN CAR
  • V8
  • 2WD
  • AUTOMATIC
  • 148,565 MILES
My driver side front needs a new master window switch and the old one is not hooked up, do you know where each wire goes or where I can get a wire digram. Thx jimmy
Tuesday, March 1st, 2011 AT 2:06 AM

8 Replies

Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
Hey Jimmy, this wiring diagram should help you out, let me know if you need anything else, is'nt there a exisiting connector that will plug into the the replacement switch?
Was this
answer
helpful?
Yes
No
Tuesday, March 1st, 2011 AT 2:29 AM
Tiny
92 LINCOLN 4.6
  • MEMBER
  • 12 POSTS
Do you have anything that show the color of wires I can't see the in the diagram you sent
Was this
answer
helpful?
Yes
No
Tuesday, March 1st, 2011 AT 3:33 PM
Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
Black wire-ground
lite blue/black wire-power
red/lite blu wire- window lock
yellow wire/red wire- up/down Left front window
white/yellow wire and tan/lt blue wire-up/down right front window
grey/orange wire and yello/lite blue wire- up/down left rear window
yello/black wire and red/black wire-up/down right rear

Sometimes if you right click on diagram and save to computer, then open file you can make out the diagrams better. Let me know if you have any more questions.
Was this
answer
helpful?
Yes
No
Tuesday, March 1st, 2011 AT 5:13 PM
Tiny
92 LINCOLN 4.6
  • MEMBER
  • 12 POSTS
Can you find that diagram but more clear I can't see where the wires go its to blur
Was this
answer
helpful?
Yes
No
Tuesday, March 1st, 2011 AT 11:44 PM
Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
Find what diagram? Can you tell me exactly what you are trying to do, I am having a hard time understanding what you need. Let me know.
Was this
answer
helpful?
Yes
No
Wednesday, March 2nd, 2011 AT 12:02 AM
Tiny
92 LINCOLN 4.6
  • MEMBER
  • 12 POSTS
Ok i'm trying to put a new power window master switch on driver front but the old one wasn't on the car so I don't know where any of the wires go on the control and you send me a diagram of wiring but I can't read it its to blury
Was this
answer
helpful?
Yes
No
Wednesday, March 2nd, 2011 AT 4:16 AM
Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
OK try these diagrams
Was this
answer
helpful?
Yes
No
+1
Wednesday, March 2nd, 2011 AT 4:43 AM
Tiny
PROTECH1980
  • MEMBER
  • 901 POSTS
Can you make these out better?
Was this
answer
helpful?
Yes
No
Wednesday, March 2nd, 2011 AT 4:44 AM

Please login or register to post a reply.

Sponsored links