SPONSORED LINKS

92 GMC Sierra 2500

Tiny
NONMECH
  • MEMBER
  • 1992 GMC SIERRA
  • V8
  • 4WD
  • MANUAL
  • 329,290 MILES
92 gmc sierra 2500 how do I remove the clips holding the clutch line? The upper was push on-pull off, is the lower one help by a nut?
Monday, August 15th, 2011 AT 9:03 PM

5 Replies

Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Master or slave cylinder?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, August 15th, 2011 AT 9:12 PM
Tiny
NONMECH
  • MEMBER
  • 4 POSTS
The line runs from the master to the slave. It is about 65 inches long and held by 2 clips. The upper was a push on-pull off. The lower one, just above and to the drivers right, of the transmission is what type? I can hardly see it and it looks like a nut is involved.
Was this
answer
helpful?
Yes
No
Monday, August 15th, 2011 AT 9:25 PM
Tiny
NONMECH
  • MEMBER
  • 4 POSTS
I am talking about clips that hold the clutch line in place against the body of the truck. The line is attached to the master and slave by a pin.
Was this
answer
helpful?
Yes
No
Monday, August 15th, 2011 AT 9:40 PM
Tiny
NONMECH
  • MEMBER
  • 4 POSTS
I'll answer my own question. Yes it is a bolt. Tough to get out and tougher to put back in.
Was this
answer
helpful?
Yes
No
Tuesday, August 16th, 2011 AT 12:52 AM
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Need to use a line wrench to remove metal line
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, August 16th, 2011 AT 12:28 PM

Please login or register to post a reply.

Related Transmission Clutch Replace/Remove Content

VIEW MORE

Sponsored links