MASTER CYLINDER REPAIR

  • Tiny
  • hayleyk247
  • 1992 Chrysler New Yorker
  • 6 CYL
  • FWD
  • automatic

How do I change out a Master Brake Cylinder on a 1992 Chrysler New Yorker?

Friday, January 7th, 2011 AT 9:21 PM

1 Answer

  • Tiny
  • rasmataz
  • Member

Place drain pan under the master cylinder.
Using a suitable wrench, disconnect brake lines from the master cylinder. Plug all lines and fittings.
Remove master cylinder-to-brake booster attaching nuts.
Pull master cylinder outward and away from brake booster.
Reverse procedure to install noting the following: Prior to installing a new or rebuilt master cylinder, it should be bench bled, refer to Brakes and Traction Control/Brakes/Service and Repair.
Torque master cylinder-to-brake booster attaching nuts to 170-230 lb-in
Torque brake line fittings to 170 lb-in

Was this
answer
helpful?
Yes
No
Friday, January 7th, 2011 AT 9:32 PM

Please login or register to post a reply.

Similar Questions