I replaced the IAG valve because the truck.

Tiny
JOE281
  • 1991 NISSAN HARDBODY
  • 290,000 MILES

Hi, I replaced the IAG valve because the truck was idling so high. Still getting a steady high idle. All vacuum hoses are new, what else would cause this problem?

SPONSORED LINKS
Do you
have the same problem?
Yes
No
Wednesday, October 31st, 2012 AT 12:44 AM

1 Reply

Tiny
RASMATAZ
  • MEMBER

This IAG is it the IACV-AAC valve? Could be a Vac leak-Go to this walk thru link: http://www.2carpros.com/articles/engine-idles-too-high

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, October 31st, 2012 AT 12:58 AM

Please login or register to post a reply.

Related Engine Idle High Questions

1989 Nissan Hardbody High Idle

Engine Mechanical Problem 1989 Nissan Hardbody 4 Cyl Two Wheel Drive Manual 299000 Miles My Okd Truck Is Idling High And Will Not Kick...
Asked by Allceayt ·
1 ANSWER
1989
NISSAN HARDBODY

Suffering From High Idle Problems

I Have A 1995 Nissan Hardbody With A Fuel Injected 3.0l V6 5spd 4x4. Currently It Is Suffering From High Idle Problems, Ranging From 1000...
Asked by Jaguyver ·
1 ANSWER
1995
NISSAN HARDBODY

My Truck Lopes When At Idle When Its Warmed Up.what...

This Problem Arose After I Fixed A Previous Problem. The Previous Promblem Caused The Truck To Cut Out N Shake While I Was Driving. It Would...
Asked by hamp718 ·
1 ANSWER
1996
NISSAN HARDBODY

My Nissan D21 Has Auto Transmission, Recently When...

My Nissan D21 Has Auto Transmission, Recently When You Start The Engine The Power Hold Switch Starts Blinking For 8 Seconds And...
Asked by rohanjayasinghe ·
2 ANSWERS
1996
NISSAN HARDBODY

Recommended articles