Truck not firing

Tiny
TNTHAM
  • MEMBER
  • 1991 CHEVROLET ASTRO
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 418,000 MILES
My chevy s10 is getting fire on plugs but Im not getting fire at the carb. The engine just turns over. I assumed the cold weather has been affecting it freezing my fuel lines. So I have filled the gas tank, poured in "HEET" and installed a dipstick engine warmer and used a droplight. Normally during the daytime it will start but no luck today.I have pulled a plug and checked for firing and the plug is firing.
Saturday, January 8th, 2011 AT 10:46 PM

3 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check the fuel pressure to rule out the fuel filter and fuel pump and if the injectors are pulsing
Was this
answer
helpful?
Yes
No
Saturday, January 8th, 2011 AT 11:13 PM
Tiny
TNTHAM
  • MEMBER
  • 2 POSTS
I've poured gas into the carb and it still doesn't fire. I just removed my distributor cap and removed any build up. I replaced the cap but yet the vehicle will still not fire. I appreciate your help greatly because without this truck running I am stuck. I will donate to the cause soon. Anymore ideas that may help?
Was this
answer
helpful?
Yes
No
Sunday, January 9th, 2011 AT 12:08 AM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Sounds like no spark-do below

No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs, coil's resistances, distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it
Was this
answer
helpful?
Yes
No
Sunday, January 9th, 2011 AT 1:07 AM

Please login or register to post a reply.

Sponsored links