Head gasket

Tiny
LOU
  • 1990 VOLVO 760
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 121,000 MILES

Head bolt torque

Do you
have the same problem?
Yes
No
Sunday, November 28th, 2010 AT 4:41 AM

1 Reply

Tiny
JACOBANDNICKOLAS
  • EXPERT
  • 68,356 POSTS

There are three steps. First, tighten then to 14 ft. Lbs. Second, go to 43 Ft. Lbs. Third step, turn each bolt an additional 90 degrees. NOTE: Place a thin coat or oil on the bolt before installing them.

I have attached a picture of torque sequence. NOTE: There are two pictures. The top one is for removal, and the bottom one is for replacement.

Let me know if you have questions.

Joe

Please consider a donation to help us answer more questions.
Was this
answer
helpful?
Yes
No
Sunday, November 28th, 2010 AT 5:35 AM

Please login or register to post a reply.

Help us by donating