1990 Lincoln Town Car shift shaft tube

Tiny
JESSE KING86
  • MEMBER
  • 1990 LINCOLN TOWN CAR
  • 5.0L
  • V8
  • RWD
  • AUTOMATIC
  • 115,000 MILES
I have to replace my shift shaft tube and have removed the for bolts on the bottom of column. It still seems something is restricting it from dropping low enough to get to. Is there something I missed
Do you
have the same problem?
Yes
No
Wednesday, February 12th, 2014 AT 2:24 PM

3 Replies

Tiny
KNOWLEDGE IS POWER
  • MECHANIC
  • 1,136 POSTS
Make sure you've disconnected the string that goes to the shift indicator on top of the column
Was this
answer
helpful?
Yes
No
Wednesday, February 12th, 2014 AT 2:31 PM
Tiny
JESSE KING86
  • MEMBER
  • 2 POSTS
The string that attaches to the hook lever that is on the shaft correct? If so I have already done that there is some kind of brace that seems to be stopping it from lowering the rest of the way. I just wonder if I need to take the whole dash out to get where I need to be? Thank you for your help.
Was this
answer
helpful?
Yes
No
Thursday, February 13th, 2014 AT 10:49 AM
Tiny
KNOWLEDGE IS POWER
  • MECHANIC
  • 1,136 POSTS
Once you get the knee bolster off theres 4 nuts that hold up the whole shaft. There really shouldn't be anything else holding it there. The dash doesn't have to come out
Was this
answer
helpful?
Yes
No
Saturday, February 15th, 2014 AT 4:37 PM

Please login or register to post a reply.

Sponsored links