How to replace a water pump on a 1989 Oldsmobile touring Sedan 98 model?

Tiny
SHYUCESS
  • MEMBER
  • 1989 OLDSMOBILE 98
  • 15,000 MILES
The car needs a new water pump, I went to a couple places and its told to 1.6 hours of a job, I want to know how to do it myself.
Tuesday, December 13th, 2011 AT 10:22 PM

1 Reply

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Disconnect battery ground cable and drain cooling system.
Remove drive belts and disconnect radiator hoses and heater hoses from pump.
Remove water pump pulley attaching bolts, Fig. 28. The long bolt is accessed through hole in body side rail. Remove pump pulley.
Remove water pump attaching bolts and the water pump.
Reverse procedure to install.

Good luck

Roy
Was this
answer
helpful?
Yes
No
+1
Tuesday, December 13th, 2011 AT 10:25 PM

Please login or register to post a reply.

Sponsored links