WE HAVE NEW SEALS FOR THE CLUTCH MASTER CYLINDER...

  • Tiny
  • Nandaeschlerhauser
  • 1989 ISUZU

We have new seals for the clutch master cylinder and a rebuild kit for the slave cylinder. But we don't have any schematics to make sure that we put everything in the way that it should go! Any schematics that we could download or buy? Someone borrowed our manual and never returned it. We are on the little island of RArotonga in the South Pacific : ) THANKS!

PS it is a 1989 ISUZU "FORWARD" truck (crane)

Do you
have the same problem?
Yes
No
Saturday, March 16th, 2013 AT 11:31 PM

2 Replies

  • Tiny
  • ASEMaster6371
  • EXPERT
  • 25,554 POSTS

If it is an aluminum body, it may not work. The pits are the downfalls if they are there.

As far as assembly, did you line up the parts as you removed them? We have no manuals here. Make sure everything is super clean

bleed very well to make sure you get good pressure

Roy

Was this
answer
helpful?
Yes
No
Saturday, March 16th, 2013 AT 11:47 PM
  • Tiny
  • Nandaeschlerhauser
  • MEMBER

Ummm, yeah, we know this : ) What we need is a diagram or schematics. There must be someplace that we could get a photo or drawing? Thanks!

Was this
answer
helpful?
Yes
No
Tuesday, March 19th, 2013 AT 7:17 AM

Please login or register to post a reply.

Other Transmission Clutch Master Primary Cylinder Questions