BECOME A MEMBER
Sign up with Facebook
I AGREE TO THE
Login with Facebook
BECOME A MEMBER
1989 GMC 1TON ELECTRICAL PROBLEM
1989 GMC C2500
When I turn on the ignition it blows the blinker fuse I recently had the column replaced could a pinched wire in the column be the problem?
have the same problem?
Tuesday, March 15th, 2011 AT 6:59 AM
The blinker switch isn't run through the ignition switch. Therefore, something tells me they have a couple wires pinched. The only thing you can do is take the column apart and start checking it.
Wednesday, June 15th, 2011 AT 3:31 AM
to post a reply.
When I Change The Setting On The Tilt Wheel We ...
When I change the setting on the tilt wheel we sometimes lose the radio, power windows, and door locks. This also happens sometimes whe
I can not remove the igintion harness from the steering column b c the bolts are flat. How do I remove the ignition harness bolts screw
How Do I Remove Ignition Switch Its On The Dash...
How do I remove ignition switch its on the dash not steering column also dash.I need to replace burnt out wire from radio
1995 Dodge Ram 1500 4x4 Automatic V8 360
The truck had an ignition fire. The entire dash, steering column, and all the wiring attached to the steering column was replaced. The
View More REPLACE/REMOVE WIRING HARNESS COLUMN questions
Found 8 related questions
On This Pick Up 94 Sonoma V6 Tilt If
The Headlight Switch
Have Replaced Steering Column And Harnes
s Because There W
1999 S-10 Sometimes Dies After Start, When You Give It Gas
Ask a Car Question. It's Free!
Replace Your Turn Signal Switch Like a Pro
Need To Remove Your Steering Wheel? Do It Like The Pros
Power Steering Pump Pulley Removal
Find a car manual for your car
© 1999 - 2016 2CarPros, Inc.