SPONSORED LINKS

I have change the plllugs and the wires and my.

Tiny
ANONYMOUS
  • MEMBER
  • 1989 CHEVROLET CELEBRITY
I have change the plllugs and the wires and my car still wont stay started. When I get it to start it will run for a minute and then shut off. It is getting fuel. When started it shuts off when you hti the gas pedal. What could it be?
Monday, February 11th, 2013 AT 6:02 PM

2 Replies

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
How long since a tune-up? Are there any applicable trouble codes? Use a gage and check fuel pressure. Some of the national brand autostores will loan out a fuel pressure gage. You may have to put up a deposit on the gage, but, you get your deposit back when you return the gage.

To check mil codes, you use a jumper wire at the A & B terminals at your datalink connector. Turn key just till dash lites come on, no further. Then the mil on the dash starts flashing, you count the flashes to get the codes. Your looking for two digit codes. Let us know what you find.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, February 11th, 2013 AT 6:12 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Whats litre size of engine?
Was this
answer
helpful?
Yes
No
Monday, February 11th, 2013 AT 6:13 PM

Please login or register to post a reply.

Sponsored links