BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
Air Bleed Valve
Radiator adding coolant and bleeding
1989 BUICK LESABRE
I have 1989 Buick lesabre, I changed the radiator and after adding coolant and bleeding it my temp gauge needle only stays at the first line, just below normal.
The only time my temperature gauge needle stayed at the middle line or at normal operation was when I was bleeding my radiator with cap off.
have the same problem?
Monday, October 1st, 2012 AT 3:19 AM
Check the thermostat, it could be stuck open.
Monday, October 1st, 2012 AT 10:45 AM
to post a reply.
Related Air Bleed Valve Content
2005 Buick Lesabre Oil In Coolant
If There Is Oil In The Coolant And The Gasket Needs To Be Replaced. How Expensive Is This? Is It Worth Fixing Or Would It Be Better To Get...
2000 Buick Lesabre Buick Lesabre Custom 2000 Coolant...
So About A Week And A Half Ago My Buick Lesabre Started Shaking While Idling. When I Tried To Start Moving The Car, The Vibration Increased...
2004 Buick Lesabre Temp Gauge In Red But Coolant...
The Temp Gauge On My 2004 Lesabre Is Going All The Way Into The Red But The Coolant Level Is Great. I Know This Model Has Problems With...
1993 Buick Lesabre Oil In The Coolant Tank
There Is A Black Substance That Looks And Smells Like Motor Oil In The Coolant Tank, Although There Is No Water In My Oil, And The Oil...
1993 Buick Lesabre Transmission Fluid Mixing With...
Engine Cooling Problem 1993 Buick Lesabre 6 Cyl Front Wheel Drive Automatic There Is Transmission Fluid In My Radiator And Overflow....
little john 222
Ask a Car Question. It's Free!
Coolant Drain and Refill Chevrolet Tahoe
Radiator Fluid Flush and Fill Ford Explorer
Coolant Drain and Refill Acura MDX
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.