The starter on my 1988 Toyota 4Runner worked itself loose. How do I go about re-ataching it?

Tiny
SILVERH24
  • MEMBER
  • 1988 TOYOTA 4RUNNER
  • 200,000 MILES
Just one bolt came loose, when I push on starter, it moves.
Do you
have the same problem?
Yes
No
Wednesday, December 7th, 2011 AT 12:58 AM

7 Replies

Tiny
SATURNTECH9
  • EXPERT
So did the hole strip out or the threads get damaged?
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 1:02 AM
Tiny
SILVERH24
  • MEMBER
No, they are still good on the bolt. Not sure where the hole is thogh.
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 1:04 AM
Tiny
SATURNTECH9
  • EXPERT
There is a hole in the starter that you line up with the other hole.
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 1:11 AM
Tiny
SILVERH24
  • MEMBER
But where is hole? I have no jack but I can fit under truck
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 1:13 AM
Tiny
SATURNTECH9
  • EXPERT
Which engine do you have the four or six cylinder?
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 1:38 AM
Tiny
SILVERH24
  • MEMBER
6
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 1:40 AM
Tiny
SATURNTECH9
  • EXPERT
I hope this pic that I posted helps its all I can think of to help you find the hole.
Was this
answer
helpful?
Yes
No
Wednesday, December 7th, 2011 AT 1:56 AM

Please login or register to post a reply.

Recommended Guides