BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
1988 CHEVROLET TRUCK
Why do I have no power to my fuel pump? Fuse good relay has 1wire hot constant and 1 hot when switch is on.1988 c-1500 2wd
have the same problem?
Saturday, March 26th, 2011 AT 2:15 AM
Hot wire for a few sec's is the pump cycling on ignition, if pump is not working at this time the pump will be faulty.
Saturday, March 26th, 2011 AT 3:25 AM
If it fires up after the 2secs priming and dies out check the fuel pump and fuel sending unit
Saturday, March 26th, 2011 AT 4:18 AM
to post a reply.
Related Fuel System Fuel Pump Fuse Questions
1988 Chevy Truck Fuel Pump
Electrical Problem 1988 Chevy Truck V8 Four Wheel Drive Manual Recently Changed The Fuel Pump, Now Not Getting Any Power To The...
1999 Chevy Truck Fuel Pump Fuse Keeps Burning Out
Electrical Problem 1999 Chevy Truck V8 Two Wheel Drive Automatic My Fuel Pump Fuse Keeps Burning Out When I Turn The Ignition On And...
1989 Chevy Truck S-10 Starts But Fuse For The Fuel...
Electrical Problem 1989 Chevy Truck 6 Cyl Two Wheel Drive Manual 243, 00 Miles My Question Is That The Fuse Related To I Believe The...
1996 K1500 No Power To Computer, Coil, Fuel Pump...
Cranks Over But Will Not Start. Fuses All Good Both Inside Of Truck And Under Hood. Checked For Voltage To Fuse Block Under Hood Yes....
Ask a Car Question. It's Free!
Fuel Pump Control Module Fuse Replacement
Fuel Pump Replacement Done Right
Find a car manual for your car
© 1999 - 2017 2CarPros, Inc.