1987 Chevrolet Nova A113L automatic transmissions pump

Tiny
BUTTS6954
  • MEMBER
  • 1987 CHEVROLET NOVA
  • 1.6L
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 27,000 MILES
I'd like to know the ft. Lbs torque (if there is!) Of the auto transmissions (A113L) pump bolts. I'm replacing the O-ring seal that goes around the pump along with the front seal.
Do you
have the same problem?
Yes
No
Saturday, May 23rd, 2015 AT 2:09 PM

5 Replies

Tiny
HMAC300
  • EXPERT
Make sure you replace the little rubber sided washers on bolts otherwise it will leak when hot and torque is 16 ft lbs on all of them.
Was this
answer
helpful?
Yes
No
+1
Saturday, May 23rd, 2015 AT 3:30 PM
Tiny
BUTTS6954
  • MEMBER
I just wanted to thank you- big time- for answering my question about ft. Lbs. Torque on those A113L tranny pump bolts, AND pointing out that I have to replace those rubber-sided washers! Much more than appreciated man. Thanks again. Ill be coming back!
Kevin
Was this
answer
helpful?
Yes
No
Saturday, May 23rd, 2015 AT 8:22 PM
Tiny
BUTTS6954
  • MEMBER
Hi!
It sounded like I knew about the rubber sided washers you mentioned in your answer! Sorry about that. I had to get back to you about that. On the original trans, and as far as I can remember, on this replacement, used tranny I'm putting in, I don't remember those washers being on those pump bolts! It makes perfect sense to me that washers like that are used! That might explain to me where the leak I have is originating from! Is there anywhere I can get washers like that for those bolts? A dealer, parts place? Once again, thank you! You guys helped me out big time!
Kevin
Was this
answer
helpful?
Yes
No
Monday, May 25th, 2015 AT 12:22 PM
Tiny
HMAC300
  • EXPERT
Try auto parts store or trans shop
Was this
answer
helpful?
Yes
No
Monday, May 25th, 2015 AT 1:19 PM
Tiny
BUTTS6954
  • MEMBER
Thanks again Hmac300! More than appreciated man. Kevin
Was this
answer
helpful?
Yes
No
Monday, May 25th, 2015 AT 2:26 PM

Please login or register to post a reply.

Recommended Guides