No heat from heater

Tiny
GEORGETOY
  • MEMBER
  • 1986 TOYOTA 4RUNNER
  • 130,000 MILES
All works, but no heat from the heater, have flushed out core, no blockage. Have manuley(under hood opened valve) no hot water to core. Pulled valve inspected, it's fine.
Could I have the lines hooked up wrong? Driver side from water pump in to valve, on into core, out from core to block. Core flushed free, no crud, and flowed fine. Motor comes to temp. As normal.
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Monday, December 12th, 2011 AT 1:24 AM

3 Replies

Tiny
RIVERMIKERAT
  • EXPERT
Check the blend doors in the airbox under the dash.
Was this
answer
helpful?
Yes
No
Monday, December 12th, 2011 AT 1:34 AM
Tiny
GEORGETOY
  • MEMBER
Haha, OK of course the one thing I have not really checked, thank you.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, December 12th, 2011 AT 5:22 AM
Tiny
RIVERMIKERAT
  • EXPERT
My pleasure. That's why I make the "big bucks".
Was this
answer
helpful?
Yes
No
Monday, December 12th, 2011 AT 5:27 AM

Please login or register to post a reply.

Related Heater Not Working Content

Heater Not Working
VIDEO
Heater Not Working
Instructional repair video
Heater Not Working
GUIDE
Heater Not Working
Step 1 - A heater cannot operate unless the engine is full of coolant/antifreeze. If coolant level is low check the system for leaks.
VIEW MORE

Sponsored links