Chevy

Tiny
JRHAROLDSON
  • MEMBER
  • 1986 CHEVROLET TRUCK
  • V8
  • 4WD
  • AUTOMATIC
I have a 1986 Chevy K10 Scottsdale 4x4 with a 305 in it. I have replaced spark plugs, Wires, Rotary Button, distributor Cap Fuel, Pump and filters, Carburetor. But it has no power. It will idle and start up fine but when you put it in gear and push the gas it will barely go. Like no horsepower.
Do you
have the same problem?
Yes
No
Tuesday, January 4th, 2011 AT 12:54 PM

3 Replies

Tiny
JIMMYJAMES
  • MEMBER
  • 4 POSTS
Check your compression you'll need at least 120 psi and within 10 % of the highest reading for the rest of the cylinders. This is a basic check out. It could be quite a number of diffrent things that could cause your power loss. Including a restricted exahust if you've been missfireing for any real length of time.
James
Was this
answer
helpful?
Yes
No
Tuesday, January 4th, 2011 AT 1:55 PM
Tiny
RNDARROW
  • MEMBER
  • 15 POSTS
Also check the timing, should be either 10 or 12 degrees btc.
Was this
answer
helpful?
Yes
No
Tuesday, January 4th, 2011 AT 8:26 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,005 POSTS
Make sure you are getting the correct fuel pressure and volume.
Was this
answer
helpful?
Yes
No
Tuesday, March 8th, 2011 AT 3:42 AM

Please login or register to post a reply.

Sponsored links