1984 Chevrolet Truck Stalls when put in gaer

Tiny
CHAZ MEEKS
  • MEMBER
  • 1984 CHEVROLET TRUCK
  • 140,000 MILES
My brother has a 84 k10 350 4speed four wheel drive it idles fine but put in gear it dies don't know if its the cluch or wut it is tyed checkin the sparked plugs n wires they r good the Gear oil in trans is good so don't know what else 2 check need help
Sunday, August 25th, 2013 AT 7:53 AM

4 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
What does it idle at without being in gear it may be tolow or it sounds like a carb overhaul
Was this
answer
helpful?
Yes
No
Sunday, August 25th, 2013 AT 8:24 AM
Tiny
CHAZ MEEKS
  • MEMBER
  • 3 POSTS
It idles at 800 but we dove it n it's shakes n backfires n shutoff it didn't make it 200 feet
Was this
answer
helpful?
Yes
No
Sunday, August 25th, 2013 AT 8:29 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check compression, you may have a bad valve it must be within 20% of each cylinder. Could also be a bent pushrod/worn lifter/ rocker arm
Was this
answer
helpful?
Yes
No
Sunday, August 25th, 2013 AT 10:27 AM
Tiny
CHAZ MEEKS
  • MEMBER
  • 3 POSTS
Thanks but we pushed the driveshaft back into the yoke n it runs its weird but it worked
Was this
answer
helpful?
Yes
No
Sunday, August 25th, 2013 AT 4:28 PM

Please login or register to post a reply.

Sponsored links