SPONSORED LINKS

Suburban

Tiny
RIGO
  • MEMBER
  • 1984 CHEVROLET SUBURBAN
  • 4WD
  • AUTOMATIC
  • 84,000 MILES
My suburban wont start i've changed cap and rotor module the coil and still no fire at the ignition put a new battery dont want to spend anymore money on the truck can you help I bought the truck off my sister as a project and its a 1984 chevy suburban 5.7 it will turn over if I put a screw driver on the starter other than that no fire what so ever on the ignition when I turn the key
SPONSORED LINKS
Sunday, January 2nd, 2011 AT 8:16 PM

3 Replies

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
You may need to check feed to and from ignition switch. Check neutral switch, also. That pruple wire at the starter solenoid should be hot with key in the crank position.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Sunday, January 2nd, 2011 AT 8:27 PM
Tiny
RMJ156248
  • MEMBER
  • 6 POSTS
Check connections and your starter if you are not getting it to crank over.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, January 2nd, 2011 AT 8:36 PM
Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
Yeah, I agree.
Was this
answer
helpful?
Yes
No
Wednesday, March 2nd, 2011 AT 4:05 PM

Please login or register to post a reply.

Related No Spark Content

Ignition Spark Check
GUIDE
Ignition Spark Check
An engine's ignition system is responsible for igniting the fuel-air mixture inside the combustion chamber and when the ignition process stops the engine will not run....
VIEW MORE

Sponsored links