1981 NISSAN 280ZX

  • Tiny
  • James415
  • 1981 Nissan 280Z
  • 6 CYL
  • 2WD

I have a 1981 nissan 280zx won't start any more, I have recently put a new coil battery and fuses in my 280zx. I only just replaced the coil because it wouldn't start. I have power to the coil but no spark

Monday, August 1st, 2011 AT 5:51 AM

4 Answers

  • Tiny
  • merlin2021
  • Expert
  • 17,583 posts

Check distributor. May be removed and brought to parts store to br tested. Mark the rotor to distributor housing and engine before removing. These marks will aid in installing a new one.

Was this
answer
helpful?
Yes
No
Tuesday, August 2nd, 2011 AT 9:08 AM
  • Tiny
  • James415
  • Member

No its not the distributor

Was this
answer
helpful?
Yes
No
Friday, August 5th, 2011 AT 1:14 AM
  • Tiny
  • James415
  • Member

Could it be the EGI computer

Was this
answer
helpful?
Yes
No
Friday, August 5th, 2011 AT 1:16 AM
  • Tiny
  • rivermikerat
  • Expert
  • 6,118 posts

Ignition control module. Ignition module pickup inside the distributor. Check the primary side of the coil to make sure the circuit is being opened and closed. Make sure you have power to the distributor. If not, trace the wires until you find out why.

Was this
answer
helpful?
Yes
No
Friday, September 30th, 2011 AT 12:35 AM

Please login or register to post a reply.

Similar Questions