SPONSORED LINKS

Points and condensor

Tiny
CHRIS PAYNE
  • MEMBER
  • 1973 VOLKSWAGEN BEETLE
  • 4 CYL
  • 2WD
  • MANUAL
1973 vw super beetle I bought points and condensor for it took dist cap off and someone has switched it to electronic ignition. Can I take that off and put the points and condensor back in it someone please help he out thanks chris
Sunday, June 5th, 2011 AT 4:20 AM

3 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Just replace back to points and condenser and use the primary wire coming from the ignition switch to the coil's positive terminal
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, June 5th, 2011 AT 4:25 AM
Tiny
CHRIS PAYNE
  • MEMBER
  • 7 POSTS
Where does the condensor plug into
Was this
answer
helpful?
Yes
No
Sunday, June 5th, 2011 AT 4:35 AM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
The condenser attaches to the points wire, the condenser usually is attached to the side of the distributor.
Was this
answer
helpful?
Yes
No
Sunday, June 5th, 2011 AT 7:35 AM

Please login or register to post a reply.

Related Ignition Distributor Content

Distributor Replacement
VIDEO
Distributor Replacement
Instructional repair video
Ignition Distributor Installation
GUIDE
Ignition Distributor Installation
An automobile engine ignition distributor is used to allocate the ignition spark from the coil to the appropriate cylinder for the combustion process to occur. In this guide...
VIEW MORE

Sponsored links