What would cause raw gas to be dripping from the.

Tiny
ANONYMOUS
  • 1973 FORD F-100
  • 100 MILES

What would cause raw gas to be dripping from the r/h venturi on a 2150 carb? The 360's loading up @ around 2300 rpm's and the r/h venturi is dripping gas, but not at idle. The accelerator pump diaphragm and power valve have been replace, as well as the venturi and jets taken apart and cleaned thoroughly. Any help would be greatly appreciated.

Scott

Sunday, December 16th, 2012 AT 10:10 PM

1 Reply

Tiny
ASEMASTER6371
  • EXPERT
  • 25,554 POSTS

High float level. The float most likely has become too heavy.

Roy

Was this
answer
helpful?
Yes
No
Sunday, December 16th, 2012 AT 10:14 PM

Please login or register to post a reply.

Other Carburetor Replace/Remove Questions