I have a 402 big block in my Chevelle

ANONYMOUS

1971 CHEVROLET CHEVELLE

I have a 402 big block in my Chevelle. I started hearing valvetrain noise so I pulled the valve covers to find 3 rocker arms on each side not getting any oil. I pulled the push rods and they are clean and free of debris. I was wondering what else I should be checking. Thank you.

1 Reply

ASEMASTER6371

EXPERT
25,499 POSTS

Fed through the lifter galley to the lifters then the push rods.

Roy

Was this

answer

helpful?

Yes

Sunday, November 11th, 2012 AT 5:11 PM

Please login or register to post a reply.

How Do I Get The Studs On My Rockers To Quit Breaking...

582 Dart Block, World Products Heads, Solid Lift Cam 780 790 Lift, 10.1, 700 Hp, Approx 700 Fpt Fpt. Dyno Tuned On Motor. Can Take It...

Asked by bg1442003 ·

2 ANSWERS

1971

CHEVROLET CHEVELLE

1972 Chevy Chevelle Oil Drips From Oil Fill Cap

Engine Performance Problem 1972 Chevy Chevelle V8 Two Wheel Drive Manual Have Oil That Drips From The Oil Fill Cap On A 1972, 454....

Asked by Rickss ·

6 ANSWERS

1972

CHEVROLET CHEVELLE

1972 Chevy Chevelle Crate Engine Swap

1972 Chevy Chevelle V8 Automatic I'm Doing An Engine Swap. The Oil Pan On The 350 Crate Engine Is Hitting The Cross Member On My 72...

Asked by Ricky211 ·

3 ANSWERS

1972

CHEVROLET CHEVELLE

1969 Chevy Chevelle Harmonic Balancer

Engine Mechanical Problem 1969 Chevy Chevelle V8 Two Wheel Drive Manual Is A Chevy 396 An Internally Or Externally Balanced Motor

Asked by reich82 ·

2 ANSWERS

1969

CHEVROLET CHEVELLE

Modify To Fit The 454 Into The Engine Bay ?

In My 73 Chevelle Laguna, Would I Need To Modify To Fit The 454 Into The Engine Bay Because Its The Same Size Car As The S3 Model That...

Asked by silent_bob72 ·

2 ANSWERS

1973

CHEVROLET CHEVELLE

Recommended Guides

Ask a Car Question. It's Free!

ADVERTISMENT

Oil Change and Filter Dodge Nitro

Engine Oil Change and Filter Toyota Corolla

Check Engine Light Clear

Find a car manual for your car

I have a 402 big block in my Chevelle

I have a 402 big block in my Chevelle. I started hearing valvetrain noise so I pulled the valve covers to find 3 rocker arms on each side not getting any oil. I pulled the push rods and they are clean and free of debris. I was wondering what else I should be checking. Thank you.

1 Reply

Fed through the lifter galley to the lifters then the push rods. Roy

Please login or register to post a reply.

Related Cylinder Head Rocker Arm Content

How Do I Get The Studs On My Rockers To Quit Breaking...

1972 Chevy Chevelle Oil Drips From Oil Fill Cap

1972 Chevy Chevelle Crate Engine Swap

1969 Chevy Chevelle Harmonic Balancer

Modify To Fit The 454 Into The Engine Bay ?

Recommended Guides

Fed through the lifter galley to the lifters then the push rods.

Roy