MY CAR IS LEAKING WATER FROM UNDER THE EXHAUST ...

  • Tiny
  • sparky1234
  • 1968 AMC Javelin
  • 72,000 miles

My car is leaking water from under the exhaust manifold through the doughnut and has almost no power

Do you
have the same problem?
Yes
No
Monday, January 16th, 2012 AT 3:59 AM

20 Replies

  • Tiny
  • mhpautos
  • Expert
  • 30,561 posts

Doughnut? Are you refering to a welsh plug / core plug in the block or as you call them in America Freeze plugs?

Was this
answer
helpful?
Yes
No
Monday, January 16th, 2012 AT 5:06 AM
  • Tiny
  • CJ MEDEVAC
  • Expert
  • 9,227 posts

YOU MIGHT TRY A STRONG FLASHLIGHT AND A MIRROR TO SEE UP UNDER THERE

THE MEDIC

Was this
answer
helpful?
Yes
No
Monday, January 16th, 2012 AT 6:24 AM
  • Tiny
  • sparky1234
  • Member

Does anyone know where to get front bumpers or a rear seat for a 1968 amc javelin

Was this
answer
helpful?
Yes
No
Thursday, January 19th, 2012 AT 1:12 AM
  • Tiny
  • sparky1234
  • Member

HELLO

Was this
answer
helpful?
Yes
No
Thursday, January 19th, 2012 AT 1:31 AM
  • Tiny
  • sparky1234
  • Member

ARE ALL 32 MECHANICS BUSY?

Was this
answer
helpful?
Yes
No
Thursday, January 19th, 2012 AT 1:33 AM
  • Tiny
  • CJ MEDEVAC
  • Expert
  • 9,227 posts

THE EBAY THING DID NOT FLY?

THE ONLY WAY YOU ARE SEEN IS IF SOMEONE HAS ANSWERED YOUR POST AND GETS NOTIFIED (AS I DID)

THEY ARE SURFING THE FORUMS AND CLICK INTO YOU

OR IF YOU START A WHOLE NEW QUESTION, THEN THE CYCLE STARTS AGAIN!

THE MEDIC

Was this
answer
helpful?
Yes
No
Thursday, January 19th, 2012 AT 1:52 AM
  • Tiny
  • sparky1234
  • Member

Where do I get a bumper

Was this
answer
helpful?
Yes
No
Thursday, January 19th, 2012 AT 2:12 AM
  • Tiny
  • sparky1234
  • Member

How do I get a ring and bearing kit to turn my javelin into a short block

Was this
answer
helpful?
Yes
No
Sunday, February 12th, 2012 AT 3:11 AM
  • Tiny
  • sparky1234
  • Member

Where do I get a short block kit?

Was this
answer
helpful?
Yes
No
Sunday, February 12th, 2012 AT 3:18 AM
  • Tiny
  • CJ MEDEVAC
  • Expert
  • 9,227 posts

NORMALLY THE NORM IS TO GET A MACHINE SHOP TO DO YOUR MACHINING, AND BUILD THE SHORT OR LONG BLOCK.

UNLESS YOU ARE GOING TO TO THE BUILDING.I'D ALSO SORTA SAY THAT MOST PEOPLE AROUND HERE OBTAIN THE PARTS FROM THE MACHINE SHOP. THE ONE I GO TO GENERALLY GIVES A REDUCED RATE IF THEY ARE PERFORMING THE MACHINE WORK. YOU WILL HAVE TO FIND OUT THE "OVERSIZES" OR "UNDERSIZES" OF YOUR PARTS, BEFORE YOU CAN ORDER THEM.

THE MEDIC

Was this
answer
helpful?
Yes
No
Sunday, February 12th, 2012 AT 3:27 AM

Please login or register to post a reply.

Similar Questions