SPONSORED LINKS

Grinds/buzzes loudly when turning right?

Tiny
BLAHAJ22
  • MEMBER
  • 2005 CHEVROLET MALIBU
  • V6
  • 2WD
  • AUTOMATIC
  • 240,800 MILES
When jacked up there appears to be nothing wrong with ball joint/bearing- nothing moves when shaken around. Car says power steering malfunction but only locks when first started, works fine when car restarts. Needs new breaks soon, however sound is present mostly when accelerating. Car also shakes pretty hard occasionally when stopping from high speeds. I plan on taking it for an alignment and brake service soon.

Car listed above is Maxx model.
SPONSORED LINKS
Saturday, October 21st, 2023 AT 11:59 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,260 POSTS
Hi,

The shaking when coming to a stop is likely due to faulty brake rotors. However, the noise is something different. Is it loud enough to record and upload it for me to hear? If you are hearing a creaking, if you bounce the front of the vehicle, can you recreate it? Also, did you inspect the stabilizer bushings and links?

I attached a pic below and highlighted bushings to check. Note, when checking the control arm bushings, you will need a pry bar to check for play.

Let me know if anything is found and if you can record it.

Take care,

Joe

See pic below.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, October 22nd, 2023 AT 9:32 PM

Please login or register to post a reply.

Related Noise Grind Content

Grinding Noises
GUIDE
Grinding Noises
This is one of the most popular grinding noises that can occur, this noise can be generated whether the brakes are being used or not. When the brake pads or shoes have worn...
VIEW MORE

Sponsored links