CHEVROLET CYLINDER HEAD GASKET

I Recently Changed My Thermostat Due To Overheating. Later Learned I Had To Bleed After. Well, I Tried And Broke Top Off Both When...

How Hard Is It To Change The Head Gaskets?

I Just Got Back My Block From The Machine Shop. I Forgot To Ask What Was Removed, But From What Is Written On The Block It Appears.040 Was...

I Have A 1995 Camaro Z 28 With 130000 Miles. A Couple Of Days Ago Everything Seemed To Be Running Fine. Went To Start The Car About An...

First, I Had A Spark Plug To Blow Out From The #3. Threads Were Stripped, So I Inserted Helix Coil And Replaced Plug. I Drove Like It...

I Drove My Chevy Blazer (2000 Ls) V6 4.3l 15 Minutes After It Stopped On Me As I Entered The Store Parking Lot. I Let It Cool For About An...

Can You Tell Me If This Engine Block Is Clean Enough To Install The Gasket And Cylinder Head? I Have Cleaned It Using A Razor, Wd40...

The Car Has Been Running Slightly Hot, So I Changed The Stuck Open Thermostat And The Thermostat Housing That Cracked. It Was Okay For A...

What's The "shop" Time To R&r The Head Gasket On The Car Listed Above Sedan 1.8l Engine? They Have Overhead Cams. Also...

I Am Putting This Engine Back Together After Replacing The Head Gaskets. I Have Number One Piston To Tdc And Just Want To Make Sure The...