AUDI A6 ENGINE

Found 145 results

Select a filter to limit the results

Symptoms Air Filter Air Intake Temperature Sensor Block Camshaft Computer Crankshaft Cylinder Head Flexplate Flywheel Idle Air Control Mass Air Flow Sensor Mount Oil Oil Change Oil Cooler Oil Filter Oil Pressure Sensor Oil Pump Oxygen Sensor Replace/Remove Serpentine Belt Starter Super Charger Throttle Body Timing Belt Timing Chain Turbo

Timing Chain Timing Marks

Hello, Wondering If Anyone Could Help Me Out With "code Bnk Timing Settings"? What Happened Was That I Purchased The Vehicle, Ran...

Asked by Chucky Chan ·

1 ANSWER

61 IMAGES

2005

Turn Over an Engine by Hand | Bar Over

VIDEO

Turn Over an Engine by Hand | Bar Over

Instructional repair video

Code Reading

A check engine light, also known as a service engine light, or a MIL (malfunction indicator light) is designed to let you know there is a problem with one of your car's...

Misfires, Low Idle, Shaking After Cam Girdle And Upper...

The Vehicle Listed Above Is A Quattro. The Car Had A Massive Oil Leak And A Large White Cloud Of Smoke On A Cold Start. Also Had Oil In...

Asked by ob44 ·

1 ANSWER

30 IMAGES

2007

Will Not Start

First It Broke Down On The Road, We Bring The Car Home And Inspect. We Changed Some Relays J271 And The Ignition Coil Was Shorted And Then...

Asked by marcusschaarup ·

46 ANSWERS

2 IMAGES

2006

Car Will Not Start

Okay. Bought The Vehicle Listed Above Used. Ran Strong For A Couple Of Weeks. It Had Been Neglected So I Start With Little Maintenance...

Asked by Mjphillips1411 ·

12 ANSWERS

1 VIDEO

2001

Intermittent Issue Of Not Starting And Shutting Off...

There's Times That My Car Will Start Right Up And I Will Drive It Down The Road Turn It Off In 5 Minutes Later It Won't Start It...

Asked by Kimberleeluna ·

1 ANSWER

7 IMAGES

2007

Code P0342, Camshaft Position Sensor Location Needed

I Have The Vehicle Listed Above Quattro That Is Giving Me A P0342 Code. Where Is - Camshaft Position Sensor 'a' Circuit Low...

Asked by Rafael Verde ·

2 ANSWERS

3 IMAGES

2003

P1000 Trouble

A P1000 code is designed to inform the driver the engine management system is not working to it's full potential. When in open loop, the powertrain management system is...

Cranks But Will Not Start

Was Driving Fine, Rpm's Went Up Then Down And Shut Off, Hasn’t Started Since. Have Checked All Fuses, All Good. Changed Fuel Pump...

Asked by Sjatkins0908 ·

1 ANSWER

9 IMAGES

2004

Gears Slipping And Jumping Into Limp Mode, Code P2704

When I've Been Driving My Car Long Enough For The Engine And Transmission To Heat Up, I Start Having Issues. The Gears Start Slipping...

Asked by DanC93 ·

1 ANSWER

10 IMAGES

2008

Cut Out While Driving?

2008 Audi A6 2l Pd140 Car Cut Out While Driving And Isn't Pumping Diesel From Lift Pump Can Be Seen Running Of External Fuel Pump...

Asked by Navi1985 ·

2 ANSWERS

2008

Engine Shuts Off When Transmission Is Shifted Into...

My Car Starts Up But Shuts Off When I Put It In Gear. Cars Drives In Reverse Or Drive.

Asked by Sickka ·

1 ANSWER

6 IMAGES

2001

Ask a new Audi A6 question

Ask a Car Question. It's Free!

© 1999 - 2025 2CarPros, Inc.