SPONSORED LINKS

93 F-150 302 mileage 113000 stalls at idle

Tiny
GOLFER1220
  • MEMBER
  • ALL OTHER MAKES ALL OTHER MODELS
I have a problem no one seems to be able to answer. My truck stalls after it has run long enough to get warm. It stalls only after you come to a stop. I have replaced, plugs, plug wires, IAC valve, distributer cap and rotor, air filter, oil pressure sensor, some visible vaccum lines, and I have done a kerosene flush also. I bought a fuel filter to change tomorrow. Any suggestions? No one has a code reader that goes back to 93 around here.
Thanks, Mike
SPONSORED LINKS
Thursday, March 15th, 2007 AT 10:19 PM

2 Replies

Tiny
2CARPRO JACK
  • MECHANIC
  • 11,533 POSTS
Ignition module, ignition coil, pick-up coil in distributor, o2 sensor shorting
Was this
answer
helpful?
Yes
No
Friday, March 16th, 2007 AT 8:05 AM
Tiny
PEPPERMRJ
  • MECHANIC
  • 1,158 POSTS
You don't need a code reader to pull the codes. The link below is for a mustang. The procedure is the same. The location of the self test ports might be different tho.

Good luck and let us know. :)
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, March 16th, 2007 AT 1:42 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links