SPONSORED LINKS

2006 Mazda Tribute REAR WHEEL SEALS LEAKING

Tiny
FAMILY5
  • MEMBER
  • 2006 MAZDA TRIBUTE
  • 3.0L
  • AUTOMATIC
  • 107,065 MILES
HOW DO WE REPLACE THE REAR WHEEL SEALS ON THIS MAZDA? THEY ARE LEAKING REALLY BAD AND WE DONT KNOW IF WE HAVE TO TAKE OFF THE WHEEL BEARING OR ALL THE OTHER THISNGS LIKE THE BALL JOINTS?
Wednesday, March 5th, 2014 AT 8:42 AM

3 Replies

Tiny
TY ANDERSON
  • MECHANIC
  • 684 POSTS
Separate the axles from the wheel bearing by removing the large nut on the end and all the suspension components attached to the rear knuckle. If you can't separate the ball joint then disconnect the link from the other end. Then you'll be able to pry the axle out of the differential to replace the seals. I would recommend having a alignment done after all repairs have been made. Let me know if you have any more questions.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, March 5th, 2014 AT 6:25 PM
Tiny
FAMILY5
  • MEMBER
  • 2 POSTS
THANK YOU THAT WAS REALLY HELPFUL!
Was this
answer
helpful?
Yes
No
Thursday, March 6th, 2014 AT 12:18 PM
Tiny
TY ANDERSON
  • MECHANIC
  • 684 POSTS
Your welcom. Thanks for the question.
Was this
answer
helpful?
Yes
No
Thursday, March 6th, 2014 AT 5:24 PM

Please login or register to post a reply.

Related Crankshaft Rear Crankshaft Seal Leak Content

Sponsored links