I get a clicking noise when I put in drive or reverse and when I start it up in the morning.
It sound like its coming from the tranny where the drive line goes into, I don't know what it is.
Do you
have the same problem?
Yes
No
Wednesday, February 19th, 2014 AT 11:22 PM
3 Replies
CARADIODOC
MECHANIC
33,689 POSTS
If that's a single metallic click once each time you shift into reverse or drive, the two most common causes are a worn universal joint or a broken engine mount.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, February 19th, 2014 AT 11:29 PM
CHICO408
MEMBER
2 POSTS
Thank you for the input!
It does it when I first start it in the morning
And then when I put it into drive or reverse only
The clicking sound only last for a few seconds.
But it comes and goes and when I give it gas it will click then goes away
Was this
answer
helpful?
Yes
No
Wednesday, February 19th, 2014 AT 11:37 PM
CARADIODOC
MECHANIC
33,689 POSTS
My vote is for a universal joint. Sometimes they're really easy to identify. Sometimes they can be a little tricky because with just hand pressure there may not be enough movement to see. Another clue is if you see a ring of rust-colored powder around one of the cups.