What is the procedure for replacing a camshaft synchronizer?

DCSAUTOREPAIR2

MEMBER
2003 FORD TAURUS
175,640 MILES

What is the procedure for replacing a camshaft synchronizer on a 2003 ford taurus se with a 3.0 ohv v6 non flex fuel engine?

Wednesday, August 1st, 2012 AT 11:54 PM

1 Reply

ASEMASTER6371

MECHANIC
52,797 POSTS

Not an easy job as there is a special required for timing the cam sensor. If you install it wrong, it could not run or will with a check engine light.
This is best left to a shop familiar with this repair

Roy

Please login or register to post a reply.

Related Camshaft Actuator Valve Replace/Remove Content

1992 Ford Taurus Timing Marks

Can Anyone Tell Me Where The Timing Marks Are For A 1992 Ford Taurus 3.6l? I Also Am Needing To Find The Degree Of Timing As Well.

Asked by denial442 ·

1 ANSWER

1992

FORD TAURUS

1999 Ford Taurus Cam Sensor

Engine Mechanical Problem 1999 Ford Taurus 6 Cyl Front Wheel Drive Automatic My Dad Has A 1999 Ford Taurus After It Sits Over Night It...

Asked by eaglerising ·

1 ANSWER

1999

FORD TAURUS

Engine Timing

What The Tdc For Ignition Timing Would Be For A 1997 Ford Taurus Sho

Asked by kevinloken ·

2 ANSWERS

1997

FORD TAURUS

1999 Ford Taurus Possible Actuator Problem?

Whenever The Car Is On, There Is A Thumping Sound Coming From The Ac Unit, Regardless If It Is On Or Off. The Thump Is Periodic...

Asked by bmatiel2002 ·

3 ANSWERS

1999

FORD TAURUS

Hvac Actuator Motor Control

Have A Hammering Sound Coming From Under Dash When First Start Up Or Turn Ac On/ Off. Sounds Like The Actuator Skips Some Teeth Them Catches...

Asked by Renotm ·

1 ANSWER

2009

FORD TAURUS

Sponsored links

Ask a Car Question. It's Free!