Hi Alan,

Is the blower fan motor working?
Do you mean the air is not heated with blower working?
Have you cecked the coolant level?
Are there any indicator lights on the control panel?
Have you checked the fuses?
Do you have any other related problems?

Answered by KHLow2008 (expert)
39,900 answers provided

your cold hot control may not be working. your cold/heat vent flap may not be functioning. check your heater core hoses under hood for hot both in and out of core.

Answered by fixitmr
24 questions asked

if you have heat but just cant change it's output direction then your cable or vacuum line to your selector control is not functioning. or the actuator is defective.

Answered by fixitmr
24 questions asked

I have heat, blower works fine, but can't change direction as fixitmr replied. Is the vacuum line and cable connected directly to the selector control? Where is the actuator located on this car?

Response from alcaf2
1 question asked

Check the rod from the actuator near the throttle pedal. It tends to be dislodged due to being py the driver's foot.

Answered by KHLow2008 (expert)
39,900 answers provided

I am happy to say that KHLow2008 was right, my problem was the rod from the actuator was disconnected. I reconnected and it works fine. Thank you.

Response from alcaf2
1 question asked

Glad to know you have fixed the problem.

Have a nice day.

Answered by KHLow2008 (expert)
39,900 answers provided

Thank you as well thats what was wrong with mine to GOOD INFORMATION!!!!

Answered by debado777
0 questions asked

You're welcome.

Have a nice day.

Answered by KHLow2008 (expert)
39,900 answers provided