2001 Saturn L200 Repair Question
Topics covered: Engine, Oil pressure, Oil pressure switch.
Mileage: No information provided.
Mileage: No information provided.
Asked on January 18, 2013
Saturn L200 Engine Problem
I found an oil leak coming from the "oil pressure switch" but I can't seem to access it other than to disconnedt it. Do I have to pull the starter first? Please help.
Asked by (pending member)Answer
Replied on January 18, 2013
REMOVAL
Ignition Off.
Disconnect engine oil pressure (EOP) switch harness connector.
Remove EOP switch (use 11/16 inch deep well socket).
INSTALLATION
Apply RTV sealant (or equivalent) to the EOP switch threads.
Install EOP switch.
Torque:
Engine Oil Pressure Switch: 10 N.m (89 in-lbs)
Connect EOP switch harness connector. Push in connector until a click is heard, then pull back to confirm a positive engagement.
Check oil level and fill if low.
Start engine and check for leaks.
