After change the head gasket the car start rough.

Tiny
PAULCHENG1987
  • MEMBER
  • 2001 CHRYSLER TOWN AND COUNTRY
After change the head gasket the car start rough then die. Most of the time it won't start and I have to push the gas. I try to put in drive but it die right away. Everyone telling me that it timing but I don't know how to time this car or if it even need to time. Plus I changed the spark plugs and wires and ingnition coil already.
Sunday, December 23rd, 2012 AT 9:32 PM

11 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Motor size?

Roy
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 9:46 PM
Tiny
PAULCHENG1987
  • MEMBER
  • 8 POSTS
I don't think so. It start after u try a couple off time. But it won't stay on for long
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 10:24 PM
Tiny
PAULCHENG1987
  • MEMBER
  • 8 POSTS
Oh it a 3.3L
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 10:25 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Ok, no timing belt involved.

Re check your work to verify all connectors and grounds are hooked up.

It sounds like a vacuum leaks.

Roy
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 10:45 PM
Tiny
PAULCHENG1987
  • MEMBER
  • 8 POSTS
I have ReCheck about 5or 6 Time already and went over all my work. Everything is screw in and plug in. People keep saying it timing but I don't know how to even time this car or if it can be time at all
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 10:52 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Cannot be timed. It is controlled by the computer.

Is there any codes?

Roy
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 10:53 PM
Tiny
PAULCHENG1987
  • MEMBER
  • 8 POSTS
Ok but here a big one for u. When I try to start fire shoot out of the throttle
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 10:57 PM
Tiny
PAULCHENG1987
  • MEMBER
  • 8 POSTS
No codes. Ok when I get the car to start it has a quite knock or something. Then I try putting it in drive it hasitate like it going to die. I have to floor it. But when I stop it die. So u think it has to do with air leaks
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 11:03 PM
Tiny
PAULCHENG1987
  • MEMBER
  • 8 POSTS
Oh I don't know if it matter but the reason for the headgasket change was cus the engine flooded. But I clean all the señor and all the parts before putting it together
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 11:13 PM
Tiny
PAULCHENG1987
  • MEMBER
  • 8 POSTS
I try to check the air but I can start the at all now
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 11:47 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Check firing order for the plug wires

Roy
Was this
answer
helpful?
Yes
No
Sunday, December 23rd, 2012 AT 11:58 PM

Please login or register to post a reply.

Sponsored links