Brake lights

Tiny
LALOPABLO1312
  • MEMBER
  • 1999 ACURA TL
  • 3.2L
  • V6
  • FWD
  • AUTOMATIC
  • 220 MILES
The brake lights don't work once I press on the pedal I ck the sensor and fuses there all good the regular lights work just fine
Friday, January 16th, 2015 AT 5:52 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Se fuse 47 & 49 have power going to them then see if wht/blk wire going to failure sensor in lh side of trunk has power if it does the sensor is probably bad or a bad ground going to that. That particular ground is also for the lights so check that as well its in lh side of trunk as well. Also check for power where pointed out in pic.
Was this
answer
helpful?
Yes
No
+1
Saturday, January 17th, 2015 AT 6:35 AM
Tiny
DONALDC
  • MEMBER
  • 1 POST
  • 2000 ACURA TL
  • 6 CYL
I have a 2000 Acura tl 3.2l and the brake lights will not work when I press the pedal. All other lights work including the high mount brake. Also my signal lights stay constant and do not flash.
Was this
answer
helpful?
Yes
No
+2
Sunday, October 7th, 2018 AT 8:12 AM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
The turn signals not flashing is most probably due to a faulty flasher relay.

Check the brake light failure sensor at rear corner of trunk for the non working brake lights.
Was this
answer
helpful?
Yes
No
+3
Sunday, October 7th, 2018 AT 8:12 AM (Merged)

Please login or register to post a reply.

Sponsored links