1999 Dodge Ram Repair Question
Asked on November 5, 2012
Dodge Ram Panel Problem
Where is the signal flasher relay located on my 3500 diesel ram truck already removed the fuel cover and steering collum
Asked by (pending member)Answer
Replied on November 5, 2012
REMOVAL
Disconnect and isolate the battery negative cable.
Remove the fuse access panel by unsnapping it from the driver side end of the instrument panel.
Remove the combination flasher from the junction block.
INSTALLATION
Position the combination flasher in the proper receptacle in the junction block.
Align the combination flasher terminals with the terminal cavities in the junction block receptacle.
Push in firmly on the combination flasher until the terminals are fully seated in the terminal cavities in the junction block receptacle.
Install the fuse access panel by snapping it into the driver side end of the instrument panel.
Reconnect the battery negative cable.
