Engine specs

Tiny
MUDTECH09
  • MEMBER
  • 1998 LEXUS ES 300
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 178,000 MILES
I am rebuilding a 1998 lexus es300 motor 1mz-fe looking for rod and main and cam shaft bolt torque specs can you help thanks
Monday, April 4th, 2011 AT 10:56 PM

13 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Attached are all the torque specifications for the engine.
Was this
answer
helpful?
Yes
No
+8
Tuesday, April 5th, 2011 AT 1:32 PM
Tiny
MUDTECH09
  • MEMBER
  • 8 POSTS
Awsome thank you so much can I ask for one more thing main bolts says see fig. 35 do you have that as well if so that would be great again thank you som much had hard time finding this information.
Was this
answer
helpful?
Yes
No
+3
Tuesday, April 5th, 2011 AT 1:50 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Here are the relevant diagrams. Seems to be having trouble trying to upload the diagrams.
Was this
answer
helpful?
Yes
No
+5
Tuesday, April 5th, 2011 AT 2:49 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
One more time.
Was this
answer
helpful?
Yes
No
+13
Tuesday, April 5th, 2011 AT 2:52 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Fig 35
Was this
answer
helpful?
Yes
No
+3
Tuesday, April 5th, 2011 AT 2:52 PM
Tiny
MUDTECH09
  • MEMBER
  • 8 POSTS
Thanks again
Was this
answer
helpful?
Yes
No
Tuesday, April 5th, 2011 AT 3:20 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
You're welcome.

Have a nice day.
Was this
answer
helpful?
Yes
No
Wednesday, April 6th, 2011 AT 12:03 PM
Tiny
MUDTECH09
  • MEMBER
  • 8 POSTS
Hi, thanks for all your help. Do you have information on timming marks more spesifily the intake and exhust cams the carks on each gear one dot and 2 dots thanks again mudtech09
Was this
answer
helpful?
Yes
No
Wednesday, April 20th, 2011 AT 3:50 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Seems there is a problem with uploading pictures at the moment but I will repost when the system recovers.
Was this
answer
helpful?
Yes
No
Wednesday, April 20th, 2011 AT 8:03 PM
Tiny
MUDTECH09
  • MEMBER
  • 8 POSTS
Ok thanks I will check back
Was this
answer
helpful?
Yes
No
Wednesday, April 20th, 2011 AT 11:46 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Here are the marks for the cam and crankshafts.
Was this
answer
helpful?
Yes
No
+4
Thursday, April 21st, 2011 AT 1:23 PM
Tiny
MUDTECH09
  • MEMBER
  • 8 POSTS
Hi thank you I have the timming marks, what I am after is the timming of the 2 cams on each head timming in realation to intake cam to exhuast cam I think I have it right but would like to make sure. At the back of the heads each cam has a gear and both intake and exhaust cams are geared to each other each cam has one dot but both have 2 dots 180 degrees opposite single dot.
Was this
answer
helpful?
Yes
No
Thursday, April 21st, 2011 AT 2:00 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Hre you are. Hope you have locked the timing gear plate with the service bolt before removing camshaft.
Was this
answer
helpful?
Yes
No
+4
Thursday, April 21st, 2011 AT 3:52 PM

Please login or register to post a reply.

Sponsored links