What causes 98 Dodge Ram van to stall at high speed and give code P0351 ?
Dec 3, 2010 at 3:56 AM
98 Dodge Ram Van Stalls
1998 DODGE VAN
OTS2M
- MEMBER
- 3 POSTS
- FOLLOW
Advertisement
A P0351 -- number one ignition coil primary circuit. This can be set by a broken wire to the ASD power supply, a bad wire from the driver wire from the coil to the engine controler, or a bad ignition coil, or in some rare cases the ECM coil driver can be bad. Does the engine start right back up?
Dec 3, 2010 at 4:07 AM
Hi, yes it starts up by pumping the accelerator while it is coasting usually at WOT.
Dec 3, 2010 at 4:25 AM
Check the wiring to the ASD. The hard part is going to be the fact that the wire may be broken internally and making contact until moved. Check for continunity while moving them around.
Dec 3, 2010 at 2:04 PM
Thanks. Iwill try that today.
Dec 3, 2010 at 2:14 PM
Let me know what you find.
Dec 3, 2010 at 5:01 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.