Main seal replacment

Tiny
P BOE
  • MEMBER
  • 1996 NISSAN SENTRA
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 150,000 MILES
I have a 1996 nissan sentra and it is leaking oil at the front main bearing seal. Must I pull the engine to replace it
Thursday, February 17th, 2011 AT 1:41 AM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
No, it is not required. This is a minor job with a book time of 1 hour.

FRONT COVER OIL SEAL
Removal & Installation

1. Remove accessory drive belts. Remove intake air duct. Remove right front wheel and splash shield, if necessary. Remove engine undercovers. Remove right engine side cover. Remove crankshaft pulley bolts. Remove crankshaft pulley.

2. Using screwdriver, pry out oil seal from front cover. Apply oil and install seal into front cover. To complete installation, reverse removal procedure.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, February 24th, 2011 AT 2:42 PM

Please login or register to post a reply.

Related Crankshaft Front Crankshaft Seal Replace/Remove Content

Crankshaft Main Seal Replacement - Front
GUIDE
Crankshaft Main Seal Replacement - Front
At the front of the engine there is a seal that designed to control oil from leaking out. This seal is located at the front of the crankshaft as it protrudes out of the front...
VIEW MORE

Sponsored links