Starter just clicks when car is warm

Tiny
RICHAR3R
  • MEMBER
  • 1996 ACURA TL
  • 197,000 MILES
Just replaced a bad starter and the new starter works fine untill the car has been warmed up. The battery is good the wires are not corroded we have already tried bypassing the security switch. The ignition solenoid and ignition switch are good. What do we try next
Friday, July 6th, 2012 AT 5:17 AM

2 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
You need to do voltage checks at the starter to verify supply voltage is good.

Make sure the grounds at the battery are also clean and secure

Roy
Was this
answer
helpful?
Yes
No
Friday, July 6th, 2012 AT 11:15 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
If the starter is a rebuilt unit, get it checked.

When it starts clicking. Disconnect the starter solenoid wire and apply battery voltage to the solenoid to test if the starter cranks.
Was this
answer
helpful?
Yes
No
Friday, July 6th, 2012 AT 2:09 PM

Please login or register to post a reply.

Sponsored links