The first thing i need from you is the exact codes your computer has that is are starting point.

Answered by saturntech9 (expert)
23,192 answers provided

I've tried to pull the code and it wont show. I did it by jumping the eec under the hood like it showed me on the computer and the light goes off.

Response from davidg2006
3 questions asked

Have you tried a analog volt meter instead of watch the light?Meaning a volt meter with a needle not digital.

Answered by saturntech9 (expert)
23,192 answers provided

No I don't have one of those. The attached image is how I did it. I used a jumper wire instead of a test light.

Response from davidg2006
3 questions asked

Looks like.your going to have to try a different way or you may to just get a scanner that will read your car.If the lights coming on and its acting up we need to start with what codes it has.

Answered by saturntech9 (expert)
23,192 answers provided

What kind of different way that I can try because I don't have a scanner, and I've been trying to pull the code all day, I know the code is what I need. I really need to get this car going because it's my only way to work. It started doing this yesterday. Thank you for your help.

Response from davidg2006
3 questions asked

Here are the ways i have listed to retrive codes analog volt meter scanner check engine light and star series tester.

Answered by saturntech9 (expert)
23,192 answers provided

Thank you, I will try to contact a buddy that might have one of those. I will get back with you and let you now the code.

Response from davidg2006
3 questions asked

Your welcome keep me posted best thing you could get is a obd1 scanner that would work on your car.

Answered by saturntech9 (expert)
23,192 answers provided