Tranny pulls

MAXIMA94

MEMBER
1994 NISSAN MAXIMA
18,000 MILES

I just got my tranny rebuild but it's pulling when changing gears it doesn't do it all the time. What could be cuasing it. Tranny #RE4FO4V, nissan maxima se 1994

Tuesday, September 27th, 2011 AT 4:07 AM

6 Replies

ASEMASTER6371

MECHANIC
52,797 POSTS

A lot of the times when the trans is removed from the car, it disturbs the frams setting and requires an alignment when the job gets completed.

Return to the shop and have them align the car for you

Roy

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Tuesday, September 27th, 2011 AT 4:25 AM

RACEFAN966

MECHANIC
5,029 POSTS

It could be a tire or wheel bearing or? What you are experiencing is called torque steer so I would ask the trans shop to check pressures and make sure all it adjusted correctly.

Was this

answer

helpful?

Yes

No

Tuesday, September 27th, 2011 AT 4:26 AM

MAXIMA94

MEMBER
3 POSTS

Im not talking abt the car pulling to the side it's the tranny itself when changing gears (overdrive) it like hits something inside.

Was this

answer

helpful?

Yes

No

Tuesday, September 27th, 2011 AT 12:01 PM

ASEMASTER6371

MECHANIC
52,797 POSTS

Ok, sorry. You must have a warranty so take it back and have them repair this issue before it causes more issues and eventual failure. It may be the converter itself or the clutches.

Roy

Was this

answer

helpful?

Yes

No

Tuesday, September 27th, 2011 AT 2:18 PM

MAXIMA94