SPONSORED LINKS

Turning left

Tiny
BILLYB0B
  • MEMBER
  • 1991 ACURA INTEGRA
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 143,000 MILES
I changed the drive side axle and wheel bearing. But it still seems to make the ugly noise when turning. What can it also be?
Wednesday, August 24th, 2011 AT 7:58 AM

4 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
Could be other side, could be trans output bearing.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, August 24th, 2011 AT 12:29 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
If you're hearing the noise more when turning left, I would be suspecting the right side bearing anyway.
Was this
answer
helpful?
Yes
No
Wednesday, August 24th, 2011 AT 12:30 PM
Tiny
BILLYB0B
  • MEMBER
  • 2 POSTS
I changed both driver side and passenger side axle and also wheel bearing. But when driving and turning. It makes the noise like the so unbarely to drive because its embrassing. When turning left just makes things harder. Idk what to do. I'm about to give up
Was this
answer
helpful?
Yes
No
Wednesday, August 24th, 2011 AT 4:03 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
You just need to get it to a professional to find out what the problem is. It could even be tires.
Was this
answer
helpful?
Yes
No
Wednesday, August 24th, 2011 AT 4:09 PM

Please login or register to post a reply.

Related Wheel Bearing Replace/Remove Content

Wheel Bearing Replacement
VIDEO
Wheel Bearing Replacement
Instructional repair video
CV Axle Bearing Press
GUIDE
CV Axle Bearing Press
This guide will show you how to use a hydraulic press to install an axle bearing into a spindle which holds a CV axle on either the front or rear of your vehicle. We are a...
VIEW MORE

Sponsored links