SPONSORED LINKS

No Spark Unless I pull the Spout connector.

Tiny
PATRICKHANES
  • MEMBER
  • 1989 FORD BRONCO
I get Spark one time and then nothing, I pull the Spout Connector and I can get spark as it should be but it won't start unless I spray fuel In the Throttle body. Checked the injectors and they have 12 volts on both sides of the connector. Got any ideas?
SPONSORED LINKS
Friday, August 3rd, 2012 AT 10:25 AM

4 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check the resistances of the injectors if okay check injector wiring back to the computer if its touching each other while computer disconnected-if okay have the computer further checked-start here and let me know-
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, August 3rd, 2012 AT 11:24 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Most probably the injectors are not pulsing. Check the cam sensor and ECM.
Was this
answer
helpful?
Yes
No
Friday, August 3rd, 2012 AT 6:48 PM
Tiny
PATRICKHANES
  • MEMBER
  • 21 POSTS
Fixed the problem, it was the computer. Sorry it took so long to get back.
Was this
answer
helpful?
Yes
No
Monday, October 29th, 2012 AT 7:47 AM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Thanks for coming back with the fix-Good Luck
Was this
answer
helpful?
Yes
No
Tuesday, October 30th, 2012 AT 1:03 AM

Please login or register to post a reply.

Related No Spark Content

Ignition Spark Check
GUIDE
Ignition Spark Check
An engine's ignition system is responsible for igniting the fuel-air mixture inside the combustion chamber and when the ignition process stops the engine will not run....
VIEW MORE

Sponsored links