Thursday, June 6th, 2019 AT 12:40 PM
JOSEPH HOLLAND
- MEMBER
- 1996 HONDA ACCORD
- 2.1L
- 4 CYL
- 2WD
- AUTOMATIC
- 205,000 MILES
How do I flush out the oil?
SPONSORED LINKS
Oil in coolant reservoir
3 Replies
ASEMASTER6371
- MECHANIC
- 52,797 POSTS
Good afternoon,
You need to drain all the coolant. Then add all water. Add dishwasher powered soap to the cooling system and run it until the thermostat opens and circulates through the system.
Then drain it all out and add coolant.
Use about half a cup of the soap.
Roy
You need to drain all the coolant. Then add all water. Add dishwasher powered soap to the cooling system and run it until the thermostat opens and circulates through the system.
Then drain it all out and add coolant.
Use about half a cup of the soap.
Roy
SPONSORED LINKS
Was this helpful?
Yes
No
Thursday, June 6th, 2019 AT 12:47 PM
JOSEPH HOLLAND
- MEMBER
- 2 POSTS
Thank you. I wanted to be sure.
Was this helpful?
Yes
No
Thursday, June 6th, 2019 AT 12:55 PM
ASEMASTER6371
- MECHANIC
- 52,797 POSTS
You are welcome.
Always glad to help.
Roy
Always glad to help.
Roy
Was this helpful?
Yes
No
Thursday, June 6th, 2019 AT 1:00 PM
