1993 NISSAN TRUCK CANT GET THE CLUTCH TO BLEED

  • Tiny
  • jeremy2805
  • 1993 Nissan Truck

Transmission problem
1993 Nissan Truck 4 cyl Four Wheel Drive Manual 160000 miles

I just had to rebuild the bottom end on my nissan and for some strange reason the slave cylinder blew out I replaced it and bleed it and couldnt get it to bleed so I replaced the master cylinder still wouldnt bleed all that is left is the damper and I dont know what it is for and it still wont bleed

Thursday, March 13th, 2008 AT 7:29 PM

1 Answer

  • Tiny
  • mastertechtim
  • Member

Jeremy is the bleeder on the slave cylinder on the top of it or the bottom. I find that some times the bleeder is on the bottom and you need to remove the slave and put it upside down and then bleed it, then reinstall it. Hope this helps

Was this
answer
helpful?
Yes
No
Thursday, March 13th, 2008 AT 7:32 PM

Please login or register to post a reply.

Similar Questions