SPONSORED LINKS

Spark plugs problems after change

Tiny
KEVINHURST06
  • MEMBER
  • GMC
1995 GMC Seirra 128000 miles.
i just changed my spark plugs and wires. I gapped them right I put them in right just like I was told it drove good till I left it off over night. Then when I went to start it in the morning it turned over all right it seemed like it wasnt running on all cylinders. So I pushed the wires all in and tried it again what could be the problem?
SPONSORED LINKS
Sunday, March 19th, 2006 AT 5:32 PM

2 Replies

Tiny
RUGRUV
  • MEMBER
  • 45 POSTS
Make absolutely sure that the right wires are going to the right cylinders.
Was this
answer
helpful?
Yes
No
Saturday, March 25th, 2006 AT 2:22 AM
Tiny
DEERAYROSE
  • MEMBER
  • 25 POSTS
Yes, the right wires to the right cylinders.
Also, be sure your new plugs are of the right heat range for your vehicle, and that the wires are fitting tightly to the connectors.
Be sure the wires are spaced exactly as they were originally, because they can interfere with eachother and other engine components if they are not where they should be or shifting around while driving.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, March 25th, 2006 AT 11:29 PM

Please login or register to post a reply.

Related Spark Plug Replace/Remove Content

Spark Plugs and Wires Replacement GMC Sierra
VIDEO
Spark Plugs and Wires Replacement GMC Sierra
Instructional repair video
Spark Plug Replacement
GUIDE
Spark Plug Replacement
A spark plug is a vital part of the engine's ignition system and is responsible for starting the combustion process. As a part of an engine tune up, spark plugs should ...
VIEW MORE

Sponsored links