What do you think may cause this? I have changed
the TPS sensor The PCV Valve and the IAC valve.
but to no avail.
What do you think it may be?
Happy New Year
Best Regards
Nick
Monday, December 31st, 2007 AT 4:26 PM
5 Replies
BMRFIXIT
MECHANIC
19,053 POSTS
Time after time we see these codes
it a vacuum leak
check or replace intake manifold gasket make sure if you do that the gaskets around the bolts are new too
and also you can have a smoke test done
i thing if you can have it smoke tested 1st you will save your self a lot of B/S & $$
Was this
answer
helpful?
Yes
No
Monday, December 31st, 2007 AT 4:55 PM
NICK VASILAKIS
MEMBER
2 POSTS
Thank you for your respose
However I don't understand the smoke test.
How is it done?
Many thanks
Nick
Was this
answer
helpful?
Yes
No
Thursday, January 3rd, 2008 AT 2:50 PM
BMRFIXIT
MECHANIC
19,053 POSTS
Smoke test
need a machine to have it done
not even all small shops have it yet
most dealer have it
Was this
answer
helpful?
Yes
No
Thursday, January 3rd, 2008 AT 4:11 PM
ZUE
MEMBER
76 POSTS
A smoke test is when you force smoke into the intake or fuel system to help determine where you may have vacuum leaks. Where you see smoke leaking out you have an area to repair. The smoke test is very sensitive and can find the smallest leaks. Some shops charge as litle as 50.00 to do the test.